In my office I have two 10″ digital picture frames which sequence through a selection of my favorite photographs. Last week I decided to purchase a 40″ TV which I plan to replace them with. Rather than have the facility folks mount it to the wall (not appropriate given this is a personal purchase and not something needed for my work) I will be placing it on the top of the back side of my wrap around desk where it will look best if raised by about 5 inches. This weekend I made quick work of a custom sized riser which will sit under the stand and match the set nicely. It took roughly 30 minutes to complete over a period of 24 hours (5 minutes to cut the MDF, 5 minutes to glue the joints, 5 minutes to round over the corners, 2 minutes per coat of black enamel repeated 8 times). I will install it on Monday and load a set of recent photos.