With all of the damage to the tiny house repaired, my attention today turned to completing some of the trim work that was never finished in the first place. The biggest challenge was building a “cap” to cover the end of the loft platform. The job was made more complicated when structural reinforcements were added to that area of the platform. I decided to use leftover bamboo plywood for the project. Not obvious from the photo is the fact that this end cap is roughly 8 feet long with 4 1/4″ wide sides that are only 1/8″ thick. Building this was quite challenging and although it was very fragile as pictured, it became very strong when glued over the solid wood end of the loft platform.