Jeanine had a clever idea for creating an indented area on the River House siding in which to display our street number. After looking through the low-quality or ridiculously expensive off-the-shelf options, I decided to design them myself and have asked Maya to print them at Formlabs on one of their large format 3D printers. Each digit is 12″ tall and 1″ thick with an integrated standoff and fastening stud.

I also completed the design of the stair stringers we will be using for our floating staircase. The original plan was to use a custom solution from a company called ViewRail. At $10K per flight (4 flights needed) that was a rather expensive solution. Next, I had the project quoted by a local welder with great reviews for this type of work. His price worked out to $6K per flight. Finally, I decide to use my own design and a local laser cutter service for a solution that will cost $3K per flight. Each flight will use four stringers made from 3/8″ thick steel plate. Two plates will be sandwiched around an LVL 2×4 for each of the two stringers. Laser cutting will provide virtually identical parts with perfect angles and dimensions eliminating the need for any means to level the treads and saving a ton of time during installation. I included features in the stringer to make them easy to hang and also to capture the treads with minimal hardware. The grooves shown on the back of the treads will engage with tongues cut into the stringers. The final execution will use properly placed holes to capture the tongues rather than the long slot for a cleaner look.